Closebee SimulatorClosebee Simulator Closebee home

Finding the right cabinet

After discovery, Bhairava Sense knows a controller exists, but not which cabinet in the tenant it is. The simulator deliberately leaves that for you to work out, as on a real site.

Four ways to find the right cabinet: a nameplate photo, reading the label, touching a sensor, and watching the network lightPhoto of thenameplateRead itRead thelabelTouch a sensor,see which movesWatch for thepulsing light
Four ways to match a found controller to a cabinet.

In Bhairava Sense, choose Help me find it for a found controller. There are four ways to match it to a cabinet.

1. Use a photo of the nameplate

Save the picture of a cabinet's nameplate in the simulator, then give it to Bhairava Sense. It uses the photo to help you decide which found controller it matches.

2. Read the label

Every cabinet has a nameplate with the maker, the model and the serial number. Read it, and look for the same details on the found controller.

3. Touch a sensor

In the simulator, use Touch on one of the cabinet's sensors. In Bhairava Sense, see which reading moves. The controller that owns that sensor is the cabinet you are standing at.

4. Show me which one

In Bhairava Sense, choose Show me which one and watch the cabinets in the simulator. The cabinet whose network light pulses is the one.

When you are sure, drag the controller onto its room. If you are wrong, the answer key will tell you at the end.