Getting started

The Bhairava Sense Simulator is one small file. There is nothing to install and no other software to add. The building built into it works without internet.

Double-click the file. The screen opens in your browser and a small window stays open.

What you need

A computer running Windows 10 or later.
The simulator file, which you can get from the practice tool section on the home page.

Download and unzip

The simulator arrives as a single zipped file. Unzip it (in Windows, right-click it and choose Extract All). You will find the one simulator file inside. You can keep it anywhere you like.

Double-click it

Double-click the simulator file. Its screen opens in your web browser, and a small window stays open next to it.

The small window

The small window has two buttons:

Open the simulator screen opens the simulator screen in your browser again, if you closed it or it did not appear.
Stop and close stops the simulator and closes everything.

Leave the small window open while you practise. The pretend tenant is there only while the simulator is running.

Allow network access

The first time you run it, Windows may ask whether to allow network access. Allow it on private networks. This is what lets Bhairava Sense see the simulated cabinets.

Run the simulator and Bhairava Sense on the same computer, or on computers on the same network.

The simulator only pretends to be equipment. It changes nothing on any real system.